[AusNOG] WatchGuard X550E Configuration Assistance

Daniel Watson Daniel at glovine.com.au
Tue Apr 29 22:23:57 EST 2014


Matthew,

I would strongly advise you watch how you speak to fellow Noggers on this mailing list,

You may have told me previously, but this is only from your personal use of these devices and you can not be 100% sure! thus I have every right to ask the wider community for their input,

Don't take this personally, but I'm not going to take your word on everything when other people MAY be more experienced or even yet achieved the same outcome I am looking for in the past

Pleas keep this thread on topic.

Daniel

Sent from my iPad

On 29 Apr 2014, at 10:08 pm, "ANSA SERVERS" <info at ausnetservers.net.au<mailto:info at ausnetservers.net.au>> wrote:


Hi Daniel,



As i have already told you in our phone calls over the past few days what you are trying to do can not be done. You can not use the same /24 as you are trying to on the WAN and then use the same /24 on your LAN.



The only way you can do is is have all your ip subnets routed to a static ip address from your DC that you will configure as your wan and then on ETH1 you will add your ip subnets and configure the rules accordinly.



There is no other way for this to be done. The firewall is a firewall not a passthrough switch.



Regards,

Matthew Matters  Managing Director / CEO of Aus Net Servers Australia Pty Ltd
Management Department  |  Small Business Hosting Sales & Services  |  Aus Net Servers Australia Pty Ltd
P  1300 933 038  |  M  0428 028 091  |  E  mmatters at ausnetservers.net.au<mailto:mmatters at ausnetservers.net.au> |  W  www.ausnetservers.net.au<http://www.ausnetservers.net.au/>
ABN 25 162 013 194 | ACN 162 013 194 | ARBN B2318 229M | #1 For Dedicated Hosting Solutions For Small Business Since 2007

<http://www.linkedin.com/company/aus-net-servers-australia>
________________________________
From: AusNOG [ausnog-bounces at lists.ausnog.net<mailto:ausnog-bounces at lists.ausnog.net>] on behalf of Daniel Watson [Daniel at glovine.com.au<mailto:Daniel at glovine.com.au>]
Sent: Tuesday, April 29, 2014 10:02 PM
To: ausnog at lists.ausnog.net<mailto:ausnog at lists.ausnog.net>; aussag at lists.aussag.net<mailto:aussag at lists.aussag.net>
Subject: [AusNOG] WatchGuard X550E Configuration Assistance

Gday Guys

I have recently acquired a Watchguard X550E Core Firewall Device which I would like to implement infront of our network in Sydney,

I have never used Watchguard until today so I am looking for some guidance from people on-list whom might know if what I'm asking is correct

Ideally I would configure Interface0 with a public IP which will be the uplink back to our router
Ideally I would then configure Interface1 with a public IP which will be downlink to switch were all servers are located
Interface2 would be disabled
Interface3 would be an uplink to switch on VLAN for PRIVATE NETWORK so we can eventually VPN into our private LAN

If anybody whom uses Watchguard can tell me if this is correct way to go about this, it would be a huge help

TIA


Regards,
Daniel Watson
Network Administrator / Network Operations Manager

E Daniel at GloVine.com.au<mailto:Daniel at GloVine.com.au>
W www.GloVine.com.au<http://www.GloVine.com.au>

[LinkedIn] <http://www.linkedin.com/company/aus-net-servers-australia> [Twitter]  <http://www.twitter.com/ansaservers> The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. If you have been sent this email and it is not addressed to you please forward the email as is to hostmaster at ausnetservers.net.au<mailto:hostmaster at ausnetservers.net.au> and delete all local and inta-local copies including backups from your system. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. This email has been scanned before transmission with business grade antivirus and antispam software but as mentioned above no warranties can be given that the email has not been contaminated after transmission.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20140429/4b6a3dab/attachment.html>


More information about the AusNOG mailing list