[AusNOG] CPE recommendation

[Mark ZZZ Smith]

Since you're looking for residential CPE, Whirlpool is a much better place for these questions.

http://forums.whirlpool.net.au/forum/82


----- Original Message -----
> From: Graeme Allen <gallen at mytelecom.com.au>
> To: ausnog at lists.ausnog.net
> Cc: 
> Sent: Saturday, 27 July 2013 2:45 PM
> Subject: [AusNOG] CPE recommendation
> 
> Hi All,
> 
> This seems simple, but I am having a very hard time finding something
> suitable. 
> 
> The basics:
> - Ethernet WAN port
> - 4 LAN ports
> - WiFi would be good
> - 2x FXS would be good
> 
> The hard bits:
> - On the WAN port, run PPPoE on the native VLAN (untagged) <= not hard
> - On VLAN xxx run VoIP for the FXS ports <= bind the UA function to this 
> interface
> - On VLAN yyy there will be multicast, the router to snoop on the LAN and join 
> on this VLAN
> - Support static routes into the various interfaces
> - Residential pricing <= HARD
> 
> I did fond one device that does what I need, it's a Thompson unit, but I
> can only buy it in lots of 10,000, with a massive lead time.
> 
> Appreciate and ideas...Cheers...Graeme.
> 
> 
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>