[AusNOG] IPv6 Internode with Juniper SRX110H-VA

Shane Short shane at short.id.au
Sat Jul 20 17:37:10 EST 2013


Any chance you could give us an example of how to configure that? I've 
spent a good 20 minutes looking and I'm stuck at the same spot Michael is :)

-Shane

Ben Dale wrote:
> This is because there are actually two DHCP clients/server daemons you 
> can use on the SRX.
>
> The original one (set system services dhcp / family inet dhcp) and the 
> "new" one that is back-ported from the MX (set system services 
> dhcp-local-server /  family inet dhcp-client).
>
> This was done to get DHCP in a routing-instance on the SRX without 
> duplicating effort
>
> When you configure DHCP client make sure you only have the statements 
> from one OR the other (eg if you're using the original DHCP server, 
> then you need "family inet dhcp" on your client interfaces or else if 
> you want "family inet6 dhcp-client you'll need to switch your server 
> to the new format), otherwise you'll get that commit error.
>
> Anyone from iinet/Westnet out there that knows about your v6 plans for 
> DSL?
>
> Cheers,
>
> Ben
>
>
> On 20/07/2013, at 3:12 PM, Michael Dale <mdale at dalegroup.net 
> <mailto:mdale at dalegroup.net>> wrote:
>
>> I have tried and failed thus far.
>>
>> SRX210 + ADSL mPim + Internode + 12.1XD45
>>
>> There is some information here that I followed:
>> http://blog.ciscoinferno.net/dhcpv6-client-on-the-srx
>>
>> Unfortunately I get the error:
>> Incompatible with the dhcp server configured under 'system services dhcp'
>>
>> Not sure why that has anything todo with DHCPv6 client for ppp 
>> connections.
>>
>> I did remove the dhcp server to test with but I never received an IP 
>> from internode, I suspect this is a JunOS issue as my SSG5 ( 
>> http://michaeldale.com.au/archive/2010/01/17/native-ipv6-over-pppoe-with-internode-and-a-juniper-ssg5/ 
>> ) could do IPv6 with Internode fine.
>>
>> Michael.
>>
>> On 20/07/2013, at 1:49 PM, Brad Peczka <brad at bradpeczka.com 
>> <mailto:brad at bradpeczka.com>> wrote:
>>
>>> It's worth mentioning that, this far, the 12.1X train has been less 
>>> than satisfactory - memory leaks galore cause it to reload on a 
>>> bi-weekly basis. It almost reminds me of some of the early Cisco 
>>> 12.4T trains!
>>>
>>> Hopefully the latest one is getting better, but I wouldn't hold your 
>>> breath.
>>>
>>> Cheers,
>>> -Brad.
>>> ________________________________________
>>> From: AusNOG [ausnog-bounces at lists.ausnog.net 
>>> <mailto:ausnog-bounces at lists.ausnog.net>] On Behalf Of Reuben 
>>> Farrelly [reuben-ausnog at reub.net <mailto:reuben-ausnog at reub.net>]
>>> Sent: Saturday, 20 July 2013 11:18 AM
>>> To: Jonathan Thorpe
>>> Cc: <ausnog at lists.ausnog.net <mailto:ausnog at lists.ausnog.net>>
>>> Subject: Re: [AusNOG] IPv6 Internode with Juniper SRX110H-VA
>>>
>>> The latest release (12.1X45-D10) of JunOS for the SRX which came out on
>>> Monday now officially supports, amongst other things:
>>>
>>> - IPv6 Support on ADSL, G.SHDSL and VDSL2 Interfaces
>>> - DHCPv6 client
>>> - Dynamic DNS
>>>
>>> Release notes at:
>>>
>>> http://www.juniper.net/techpubs/en_US/junos12.1x45/information-products/topic-collections/release-notes/12.1x45/junos-release-notes-12.1X45.pdf
>>>
>>> Haven't tried running it up yet, but this is a very good start.
>>>
>>> Reuben
>>>
>>> On 1/07/2013 1:37 PM, Jonathan Thorpe wrote:
>>>> You may find this useful (or perhaps not):
>>>>
>>>> http://forums.juniper.net/t5/SRX-Services-Gateway/Branch-SRX-as-a-DHCPv6-prefix-delegation-client/td-p/99340/page/3
>>>>
>>>> *From:*Jonathan Thorpe
>>>> *Sent:* Monday, 1 July 2013 1:35 PM
>>>> *To:* 'Skeeve Stevens'; <ausnog at lists.ausnog.net>
>>>> *Subject:* RE: [AusNOG] IPv6 Internode with Juniper SRX110H-VA
>>>>
>>>> Hi Skeeve,
>>>>
>>>> Isn’t there an issue with prefix delegation on JunOS that prevents this
>>>> from working?
>>>>
>>>> Kind Regards,
>>>>
>>>> Jonathan
>>>
>>> _______________________________________________
>>> AusNOG mailing list
>>> AusNOG at lists.ausnog.net <mailto:AusNOG at lists.ausnog.net>
>>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>> _______________________________________________
>>> AusNOG mailing list
>>> AusNOG at lists.ausnog.net
>>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net <mailto:AusNOG at lists.ausnog.net>
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20130720/66d8dbeb/attachment.html>


More information about the AusNOG mailing list