[AusNOG] getting dhcp working on an srx110

[Ben Dale]

Actually, I spoke too soon - I just got one out of the box and if you don't have ge-0/0/0 connected to something, it doesn't want to play ball.

try:

edit
delete system services dhcp propagate-settings
commit

and you should be sweet.

Cheers,

Ben

On 21/09/2012, at 3:03 PM, Ben Dale <bdale at comlinx.com.au> wrote:

> Hi Peter,
> 
> Should be pretty good out of the box - just make sure you're not plugged into ge-0/0/0, as by default this is set as an untrust interface with no configuration
> 
> Cheers,
> 
> Ben
> 
> On 21/09/2012, at 2:54 PM, Peter Brown <rendhalver at gmail.com> wrote:
> 
>> Hi lads and lasses
>> 
>> I am really new to Juniper and serious (as in non web-gui) network
>> administration and I am attempting to setup my new SRX110 for DHCP.
>> It's got a pretty much default setup (I was getting nowhere so I
>> restored factory defaults and resetup my adsl connection and passwords
>> but that's it so far)
>> The only access I have right now is console access via screen (yeah
>> it's probably not the best but it worked so I stuck with it) so
>> sending my config may be tricky unless someone knows how to do that
>> over a console port.
>> It has the default dhcp pool setup but I can't get it to work.
>> I am likely missing something really obvious.
>> 
>> Thanks in advance.
>> Pete.
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>> 
>