[AusNOG] Cisco Switch recommendations for a small ISP

[Roman]

Try WS-C3560G-48PS-E with minimum 12.2(44)SE5

Current configuration : 109 bytes
!
interface GigabitEthernet0/24
  switchport access vlan 20
  switchport mode dot1q-tunnel
  no cdp enable


On 27/03/12 11:09 AM, James Mcintosh wrote:
> Hi Noggers,
>
> Just looking for some switch recommendations for a small ISP. Mining through the info at cisco.com gives me a lot of marketing fluff but not much in the way of real info that I need. What I'm after is as follows:
>
> - Must be Cisco gear (I know there are other options out there but we are a Cisco shop)
>
> - Layer 2 Ethernet with a minimum of 48 ports gigabit ports. Layer 3 functionality within the switch is not a requirement.
>
> - Dual redundant power
>
> - Q-in-Q 802.1Q tunnelling
>
> I've looked the 3750's but they aren't gigabit. Also the 2960G-48-TC-L but it doesn't appear to have Q-in-Q 802.1Q tunnelling
>
> Any ideas?
>
>
> -James
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog