[AusNOG] Cisco 857W and DSL2?

Solly, Matthew matt at mtt.me
Fri Mar 23 13:41:09 EST 2012


Guy is right, that's not an ADSL2+ provisioned port - rather one that is provisioned at 512/512k.

The customer would need to contact Telstra support and have them fix it.

On 23/03/2012, at 1:33 PM, Skeeve Stevens wrote:

Hmmm Looks good.

DS / US

Noise Margin:    25.0 dB                         22.0 dB
Output Power:    15.0 dBm                        12.0 dBm
Attenuation:     40.0 dB                         20.0 dB

Skeeve Stevens, CEO
eintellego Pty Ltd
skeeve at eintellego.net<mailto:skeeve at eintellego.net> ; www.eintellego.net<http://www.eintellego.net/>
Phone: 1300 753 383 ; Fax: (+612) 8572 9954
Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellego<http://facebook.com/eintellego>
twitter.com/networkceoau<http://twitter.com/networkceoau> ; www.linkedin.com/in/skeeve<http://www.linkedin.com/in/skeeve>
PO Box 7726, Baulkham Hills, NSW 1755 Australia
[http://eintellego.net/sig/logo.png]
The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Fri, Mar 23, 2012 at 13:27, Guy Ellis <guy at traverse.com.au<mailto:guy at traverse.com.au>> wrote:
99% sure this is a provisioning problem with Telstra, seen it at least 10 time before.

Check the SNR (downstream), if it's >> 10dB then the line provisioning has not been updated.

 - G.



On 23/03/2012 1:17 PM, Skeeve Stevens wrote:
Hey all,

I've done some googling and the answers were inconclusive.

I have someone whose just called me re a DSL router I installed some 4 years ago for a simple change.

I noticed that it was real slow, and checked the speed, and it is still trained up as a 1.5/512

Speed (kbps):             0             1536             0               512

It is running: System image file is "flash:c850-advsecurityk9-mz.124-15.T7.bin"

But I am not sure if that firmware (or does the DSL firmware need upgrading?) supports DSL2.

It is a Telstra service in a metroish area, so I assume all DSL1 ports are actually DSL2 ports.

Apparently the customer authorised Telstra upgrading it to DSL2 a long time ago... but perhaps the modem cant support it.

Init FW:         init_3.0.010_nobist.bin
Operation FW:    AMR-3.0.010.bin




Skeeve Stevens, CEO
eintellego Pty Ltd
skeeve at eintellego.net<mailto:skeeve at eintellego.net> ; www.eintellego.net<http://www.eintellego.net/>
Phone: 1300 753 383 ; Fax: (+612) 8572 9954
Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellego<http://facebook.com/eintellego>
twitter.com/networkceoau<http://twitter.com/networkceoau> ; www.linkedin.com/in/skeeve<http://www.linkedin.com/in/skeeve>
PO Box 7726, Baulkham Hills, NSW 1755 Australia
[X]
The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM




_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog




--
Guy Ellis
guy at traverse.com.au<mailto:guy at traverse.com.au>
www.traverse.com.au<http://www.traverse.com.au/>
T: +61 3 9386 4430 M: +61 419 398 234


_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net<mailto:AusNOG at lists.ausnog.net>
http://lists.ausnog.net/mailman/listinfo/ausnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120323/bb7849fc/attachment.html>


More information about the AusNOG mailing list