[AusNOG] PIPE<->APNIC problem?

[Paul Gear]

Hi folks,

I'm having difficulty getting to www.potaroo.net, and according to
http://www.downforeveryoneorjustme.com/, it's just me.  But it's not -
PIPE and iPrimus are having the same difficulty.

My firewall:

root at oguard:~# traceroute www.potaroo.net
traceroute to www.potaroo.net (203.133.248.2), 30 hops max, 60 byte packets
1  lns20.bne1.internode.on.net (150.101.180.24)  261.040 ms  269.071 ms 
269.008 ms
 2  te0-1-0.cor1.bne1.internode.on.net (150.101.180.50)  280.821 ms 
280.757 ms  280.698 ms
 3  as4608.brisbane.pipenetworks.com (218.100.0.3)  280.640 ms  288.584
ms  288.525 ms
 4  203.119.76.177 (203.119.76.177)  296.384 ms  296.324 ms  296.265 ms
 5  * * *

PIPE:

------------------------------------------------------------------------

*Router:* Brisbane Transit (AS24130)
*Command:* ping 203.133.248.2

|

Sending 5, 100-byte ICMP Echos to 203.133.248.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
|


*Router:* Brisbane Transit (AS24130)
*Command:* traceroute 203.133.248.2

|

Tracing the route to wattle.rand.apnic.net (203.133.248.2)

  1 eth1-1.rq-127creek-cer-01.pipenetworks.com (121.101.138.72) 0 msec 0 msec 0 msec
  2 as4608.brisbane.pipenetworks.com (218.100.0.3) [AS 9722] 4 msec 0 msec 0 msec
  3 203.119.76.157 [AS 4608] 4 msec 0 msec 4 msec
  4  *  *  * 
  5  *  *  * 

command timed-out

iPrimus: 
|

------------------------------------------------------------------------

*Router:* Brisbane
*Command:* ping 203.133.248.2

|Sending 5, 100-byte ICMP Echos to 203.133.248.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
|

*Router:* Brisbane
*Command:* traceroute 203.133.248.2

|Tracing the route to wattle.rand.apnic.net (203.133.248.2)

  1 101.143-27-211.core.bne.iprimus.net.au (211.27.143.101) 0 msec
    229.gct0203.gct.iprimus.net.au (203.134.111.229) 0 msec
    101.143-27-211.core.bne.iprimus.net.au (211.27.143.101) 0 msec
  2 as4608.brisbane.pipenetworks.com (218.100.0.3) 4 msec 0 msec 0 msec
  3 203.119.76.177 [AS 4608 <http://www.arin.net/cgi-bin/whois.pl?queryinput=4608>] 0 msec 0 msec 0 msec
  4  *  *  * 
|

Optus is not having the same issues getting to APNIC:
route-views.optus.net.au>ping www.potaroo.net 

Translating "www.potaroo.net"...domain server (61.88.88.88) [OK]

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 203.133.248.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/20/24 ms
route-views.optus.net.au>traceroute www.potaroo.net

Type escape sequence to abort.
Tracing the route to www.potaroo.net (203.133.248.2)

  1 vlan299.52gdc76ue2.optus.net.au (203.202.125.3) [AS 7474] 0 msec 0
msec *
  2 te3-3-3927.sg4.optus.net.au (61.88.241.255) 0 msec 4 msec 0 msec
  3 119.225.5.238 [AS 7474] 4 msec 0 msec 4 msec
  4 syd-sot-ken-crt1-ge-7-0-0.tpgi.com.au (203.29.135.42) [AS 7545] 0
msec 0 msec 4 msec
  5 202-7-162-246.tpgi.com.au (202.7.162.246) [AS 7545] 0 msec 0 msec 4 msec
  6 159.59.194.203.static.comindico.com.au (203.194.59.159) [AS 9942] 20
msec 20 msec 16 msec
  7 159.59.194.203.static.comindico.com.au (203.194.59.159) [AS 9942] 20
msec 20 msec 20 msec
  8  *  *  *
  9 203.119.76.253 [AS 4608] 16 msec 16 msec 20 msec
 10 203.119.76.85 [AS 4608] 16 msec 20 msec 20 msec
 11 www.potaroo.net (203.133.248.2) [AS 4608] 20 msec 20 msec 20 msec

I couldn't find a network status page on PIPE or APNIC's sites to
confirm or deny an outage.  Any suggestions?

BTW, kudos to Optus for providing public telnet access to
route-views.optus.net.au - very instructive for a BGP non-wizard like me.

Thanks,
Paul
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120624/399f897f/attachment.html>