[AusNOG] Cisco 3750-X with 1000BASE-LX/LH dual SC circuits

[Matthew Moyle-Croft]

Hi,
So, you're getting delivered SC and you want to plug those into LC?

If you're getting SC "female" then just buys some SC-LC SM patch cables.  Otherwise just buy some SC-SC joiners plus SC-LC patch cables.  

Your normal fibre dealer should be able to provide.

MMC

On 21/06/2012, at 10:26 AM, James Mcintosh wrote:

> Hi Noggers,
> 
> I seem to have run into a bit a an issue. We have a few carrier circuits being delivered to us as with a single mode fiber dual SC hand off. These plug into a WS-G5486 GBIC on our current Cisco switch.
> 
> We've recently ordered some new gear, specially a Cisco 3750-X switch. I also ordered a C3KX-NM-1G network module for it and several GLC-LH-SM spf's. Upon closer inspection the GLC-LH-SM spf's take only a single LC connector.
> 
> Been googling all day but can't find an answer.
> 
> Can anyone point me in the right direction on how I can plug in our single mode fiber dual SC carrier circuits into our 3750-X (without using a third party media converter).
> 
> Surely Cisco must make an SPF that caters for this, although I've searched high and low and can't find it.
> 
> 
> -James
> 
> 
> 
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20120621/d8b8edba/attachment.html>