[AusNOG] DSLAM Dropout issues

[Davey Goode]

Hi Stavros,

I have seen problems with the netcomm modems where they send llc and vc-mux
packets in the startup negioation phase which can confuse the dslam and
cause issues with no ppp, and to make things worse its completly random...

to solve this

from the modem

telnet 192.168.1.1



password is admin



Password: *****


tc> *wan atm vcpool active no*

tc> *exit*

HTH

davey


On Fri, Apr 29, 2011 at 12:36 PM, Stavros Patiniotis <
stavros at staff.esc.net.au> wrote:

> Hi Mark,
>
> > Recently added a bras? Try the latest firmware with the nb6plus4w.
> > There was a fault with them where once you had a certain number of
> brases,
> PPP on the modem wouldn't come back up after an ADSL drop > out.
>
> I removed the MT and replaced it with the cisco. There is only one BRAS.
> The
> NB6Plus4W Rev2 is running the latest firmware 4.24p.  We too have seen this
> problem (with the nb6p4w), in which it will lose PPP and not reconnect
> until
> a power cycle. I have reported this to netcomm.
>
> Stavros
>
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ausnog.net/pipermail/ausnog/attachments/20110429/bbe7915c/attachment.html>