[AusNOG] Fibre Patch Supplier

Matt Moor m at imprecise.org
Tue Mar 23 17:21:49 EST 2010


We're using the corning leads from Anixter in quantity (50um in-rack) at 
the moment, and they're working well. Very cheap, reasonable quality.

On 23/03/10 3:58 PM, Greg Lipschitz wrote:
> I've got them from Anixter in the past
>
> Regards,
>
> Greg Lipschitz
> Director
>
> Summit IT Management
> A Division of The Summit Group (Australia) Pty Ltd
> Œreach your peak¹
>
> Phone:    1300 049 749
> E-mail:      greg at thesummitgroup.com.au
> Internet:   http://www.thesummitgroup.com.au/
> Address:   P.O. Box 3225
>                    Doncaster East,
>                    Melbourne, Australia
>                    3109
>
> To see these services and more visit our website,
> http://www.thesummitgroup.com.au/
>
> This e-mail and any attachments are confidential and may be subject to legal
> or some other professional privilege.  They are intended solely for the
> attention and use of the named addressee(s).  They must not be disclosed to
> any person without authorisation.  If you are not a named addressee you must
> not use, disclose, retain or reproduce all or any part of the information
> contained in this e-mail or any attachments.  If you have received this
> email by mistake please notify the sender immediately by return email and
> delete or destroy all copies of the email.  Any confidentiality, privilege
> or copyright is not waived or lost because this email has been sent to you
> by mistake. Before opening or using attachments check them for viruses and
> defects. Regardless of any loss, damage or consequence, whether caused by
> the negligence of the sender or not, resulting directly or indirectly from
> the use of any attached files our liability is limited to re-supplying any
> affected attachments. Any representations or opinions expressed are those of
> the individual sender, and not necessarily those of Summit IT Management.
>
>
>
>    
>> From: vak<vak at alphalink.com.au>
>> Date: Tue, 23 Mar 2010 15:53:22 +1100
>> To: "Nick @ Deltaband"<nick at deltaband.com>
>> Cc:<ausnog at ausnog.net>
>> Subject: Re: [AusNOG] Fibre Patch Supplier
>>
>> Despite not being in NSW (They are in Melbourne), I have used MSS Fiber
>> many times and they have been pretty good (They are fast and can make
>> unusual patch leads if asked).
>>
>> Quick delivery and good prices (for bulk).
>>
>> http://www.mssfibre.com.au/
>>
>> Otherwise, there is always Cabac (in NSW) (www.cabac.com.au)
>>
>>
>>
>>
>>
>> Nick @ Deltaband wrote:
>>      
>>> Hi,
>>>
>>> Can anyone recommend a cheap and reliable (I'm probably asking too
>>> much) supplier of fibre patching cables in NSW?
>>>
>>> Thanks,
>>>
>>> Nick
>>> _______________________________________________
>>> AusNOG mailing list
>>> AusNOG at lists.ausnog.net
>>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>>
>>>
>>>
>>>
>>>        
>> _______________________________________________
>> AusNOG mailing list
>> AusNOG at lists.ausnog.net
>> http://lists.ausnog.net/mailman/listinfo/ausnog
>>      
>
> --
> The Summit Group Message Security powered by ExchangeDefender: Click below to verify authenticity
> http://www.exchangedefender.com/verify.asp?id=o2N4wRu9015095&from=greg@thesummitgroup.com.au
>
>
> _______________________________________________
> AusNOG mailing list
> AusNOG at lists.ausnog.net
> http://lists.ausnog.net/mailman/listinfo/ausnog
>    




More information about the AusNOG mailing list