[AusNOG] "Equinix Unveils Plan to Build its Third IBX Data Center in Sydney"

Aaron Weller aaron at crucialp.com
Tue Jun 29 19:57:39 EST 2010


Yeah, was thinking exactly the same thing. 4kva is very low, especially compared to tomorrows standard. Initially they mentioned they were going to build for 6kva on the Skilled site, guessing now they have a new site means more space and less power density due to the amount of power they can bring in.


----- Original Message -----
From: "David Hughes" <David at Hughes.com.au>
To: "Andrew Fort" <afort at choqolat.org>
Cc: ausnog at ausnog.net
Sent: Tuesday, June 29, 2010 5:31:46 PM
Subject: Re: [AusNOG] "Equinix Unveils Plan to Build its Third IBX Data	Center in Sydney"


On 29/06/2010, at 5:25 PM, Andrew Fort wrote:

>> Albeit that's built for *much* less power density then new rooms.
> 
> Which is the real issue; for 3000 racks at a relatively conservative
> 10kW per rack, well, you can do the math there.

If only people would build to an average of 10kw per rack.  The press release talks about 4 kva which is only 3.2 kw per rack.  Sounds about the same power density as SY1.


David
...

_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog



More information about the AusNOG mailing list