[AusNOG] High pings over PIPE

Shaun Deans s.deans at bluefibre.com.au
Sat Jul 3 23:28:28 EST 2010


There is some small los for node in adl

[root at bf-l-noc01 ~]# mtr --report --report-cycles=10 www.internode.com.au
HOST: bf-l-noc01.bne1.bluefibre.n Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- bf-bdr-vi.bne1.bluefibre.  0.0%    10    0.5   0.5   0.4   0.7   0.1
  2.|-- 122.99.113.254             0.0%    10    0.3   0.3   0.2   0.5   0.1
  3.|-- st-gw1.bne1.as24045.net.a  0.0%    10    0.7   0.7   0.5   0.8   0.1
  4.|-- briscore1.sanitytechnolog  0.0%    10    1.2   0.8   0.7   1.2   0.1
  5.|-- as4739.brisbane.pipenetwo  0.0%    10    1.1   1.9   1.1   7.0   1.8
  6.|-- pos5-0-1.bdr1.syd7.intern 10.0%    10   44.8  42.1  41.1  44.8   1.4
  7.|-- pos2-1.bdr1.adl6.internod 10.0%    10   41.2  42.2  40.9  45.9   1.9
  8.|-- gi1-14.cor1.adl6.internod  0.0%    10   42.9  44.0  41.3  55.9   5.0
  9.|-- techgw.adl.internode.on.n  0.0%    10   40.9  41.1  40.8  42.0   0.3
 10.|-- pubweb.internode.on.net    0.0%    10   41.1  41.0  40.9  41.2   0.1

Going through PipeIX ok in bne though:
Bne Peer -> pipe -> Bne Peer

[root at bf-l-noc01 ~]# mtr --report --report-cycles=10 www.neural.net.au
HOST: bf-l-noc01.bne1.bluefibre.n Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- bf-bdr-vi.bne1.bluefibre.  0.0%    10    0.5   0.5   0.4   0.7   0.1
  2.|-- 122.99.113.254             0.0%    10    0.3   0.3   0.2   0.4   0.1
  3.|-- st-gw1.bne1.as24045.net.a  0.0%    10    0.7   0.7   0.5   0.9   0.1
  4.|-- briscore1.sanitytechnolog  0.0%    10    0.9   0.8   0.7   0.9   0.1
  5.|-- spartan.qld.pipenetworks.  0.0%    10    4.1   1.9   1.2   4.1   0.8
  6.|-- 180.189.155.2              0.0%    10    2.3   2.5   2.1   2.9   0.2
  7.|-- host-110-44-25-117.r.bne.  0.0%    10    2.9   2.5   2.0   2.9   0.3
  8.|-- plesk-16.neural.net.au     0.0%    10    3.1   2.6   2.2   3.1   0.3


Mark:
	You could always try some traces from the pipe Looking Glass:
	http://lg.pipenetworks.com/

-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Nathan Brookfield
Sent: Saturday, 3 July 2010 11:03 PM
To: Ausnog List
Subject: Re: [AusNOG] High pings over PIPE

Ditto for PIPE New South Wales:

core-bdr-1-1:~# sudo ping www.internode.on.net -I eth4.11 PING www.internode.on.net (150.101.140.197) from 218.100.2.120 eth4.11: 56(84) bytes of data.

--- www.internode.on.net ping statistics ---
53 packets transmitted, 53 received, 0% packet loss, time 52063ms rtt min/avg/max/mdev = 23.051/23.194/23.789/0.212 ms

Kindest Regards,
Nathan Brookfield

Network Operations Manager
The One Provider Group Pty Ltd

Web: http://www.topg.com.au
Phone: 02 4307 4206
Fax: 02 4307 4201


-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of James Braunegg
Sent: Saturday, 3 July 2010 10:52 PM
To: Mark Caetano; Ausnog List
Subject: Re: [AusNOG] High pings over PIPE

Looks all good here in Melbourne, well at least Melbourne Pipe peering.

Got any traceroute information ? where are you testing to and from ?

Kindest Regards

James Braunegg
W:  1300 769 972  |  M:  0488 997 207 |  D:  (03) 9751 7616
E:   james.braunegg at micron21.com  |  ABN:  85 126 029 203   



This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.



-----Original Message-----
From: ausnog-bounces at lists.ausnog.net [mailto:ausnog-bounces at lists.ausnog.net] On Behalf Of Mark Caetano
Sent: Saturday, July 03, 2010 10:19 PM
To: Ausnog List
Subject: [AusNOG] High pings over PIPE

Evening all,

Is anybody experiencing high pings and apparent packet loss over PIPE  
or Internode? When doing a few traceroutes, the hops that pass through  
PIPE are averaging about 400-700ms on average and often timing out.

Rgds,
Mark
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog
_______________________________________________
AusNOG mailing list
AusNOG at lists.ausnog.net
http://lists.ausnog.net/mailman/listinfo/ausnog



More information about the AusNOG mailing list